The special cement - based dry adhesive shall be used to face the surfaces covered with faience and ceramic tiles, marble and granite ties. glass bracing and mosaic bracing etc. The product is indented to be apphed on the surface with old coatings. concrete indoor and outdoor surfaces, on horizontal and vertical surfaces, in swimming pools, bathhouses, in water reservoirs and other spaces with increased humidity. Sharp temperature changes, moistness and frost do not affect the material properties.
Application:
The surface must be freed from dust, oilpant and other impurities. If the surface has the temperature higher than 25'C. the surface will have to be moistured. The mixture should be carefully poured into a vessel and mixed with 6 - 7 liters of water (preferably with a mixer) up to a uniform mass is obtained. In 10 minutes the mixture should be agitated once more for 5 - 10 minutes. and then the mixture is ready for application. The plaster must be appfced on the surface with a float with suitable manifolds. and be spread evenly The ready to use plaster must be used during 2 - 3 hours. Smoothing - out must be carried out in 24 - 48 hours.
Specifications:
Dilution with water: 7 - 81 . per 25 kg of the mixture:
Temperature of application: + 5 С до + 35 С:
Time in use: 2 - 3 hours:
The area of application depends on tile size 4 - 5 kg/m.
The ready to use plaster must be used during 2 - 3 hours.
Smoothing - out must be carried out in 24 - 48 hours.
Products of other enterprises
Description
Contact the seller
Adhesive for ceramic and other-type tiles «Extra» 25 kg