Decorative color covering of SAND STORM

Appointment: the decorative color and nacreous covering on an acrylic basis with addition of particles of sand, is used for high-quality external and internal finishing of interiors. Allows to create original drawing with effect of a sandy storm. The elegant decorative effect is reached thanks to gentle nacreous reflections of dabs which are chaotically scattered on a surface.

Preparation of a surface: To put on uniform, previously leveled, smooth, the dried and pure surface.

Before putting material to process a surface soil of deep penetration.

After full drying of a primer to apply subspoon paint with the roller or a brush so that the surface was ideally smooth without "fur coat". It is recommended to tint subspoon paint on half-tone is lighter than a decorative covering.

Drawing: Before use it is accurate to mix material, manually. Material is ready to drawing. Material dilution by water for 5-10% is possible. It is applied with small sites on the dried-up substrate, approximately on 1-2 sq.m, by means of a flat brush (fleyets), the multidirectional chaotic movements, or in the set direction. At the same time without allowing to dry, the easy movements of a brush to form desirable drawing. After drying to remove surplus of sand with a dry-brush. Does not demand application of additional decorative coverings.

Expense: 200-250 g/m2

Kolerovka: ready decisions in base gold and silver. Also it is tinted manually by any water tinting pastes. In avoidance of emergence of a raznoton, it is recommended to mix material of different parties among themselves.

Cleaning of the tool: to clear the working tool water right after completion of work.

Drying: time of formation of drawing of 5-7 min. Dry to the touch in 3-4 hours at a temperature of +22 With ° Full drying in 24 hours. Cleaning of walls with water not earlier than in 14 days.

Structure: The acrylic dispersion, nacreous and marble fillers, quartz sand modifying additives.

Fraction: micro, macro.