Used as a decorative facing material in the last layer of the outer facades of buildings and in insulating systems. It has a high resistance against water and frost. It has a natural and decorative appearance. Easy to apply.
Application surface preparation:
The surface must be cleaned of shattering oil. paint, dust. etc. substances. The precarious, fragile parts should be removed from the surface. To take measures to protect the plastered surfaces from dust. After dampening the surface it will be possible to start application.
Solution preparation and application
In the container for mixing the solution is poured with an appropriate quantity of water (7 - 8 liters of water / 25 kg powder). The powdered material is poured there in and moved with a low turn over hand mixer. Then leave for 5 minutes and then move up to a homogeneous mass formation The prepared solution should be applied to the flat thick surface with a metal spatula Thickness of the layer is 2 mm. The thickness of the layer should be determined based on the size of the largest granules.
The grounds on which to walk have to be covered with the screed, tiles, etc. the last layer You have to wait for 3 days to use this last layer.
Consuption: 4kg/m2
Packing and storage:
Supplied in 25 kg bags with polyethylene reinforcement, on pallets or in bags with slings ( sling bag )upon request.
Period of storage in dry places where there is no danger of frost, in the original packaging, subject to storage on each other for no more than 8 series is a year from the date of manufacture. After opening the bag it is recommended to use within 1 week.
The neck of the unused packages should be closed tightly.
