Filler of seams VENTUM FUGA®
Products from producer
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Description
It is used for filling of seams with the 1-6th of such finishing materials as faience, ceramic, marble, granitovy tiles and a glass and mosaic coupler. It is used in all places, both with normal, and with the increased humidity, for example baths, saunas, bathrooms, pools water tanks, etc.
Highly effective material for filling of seams on a cement basis. Possesses high stability against water and frost penetration. It is easily applied. Does not burst, does not lose color. Prevents formation of mosses and a bacterium.
Application
The surface needs to be cleared of dust, fat, paint, etc. of substances. If temperature of a surface is above 25 °C, it needs to be moistened with water for receiving more damp surface.
Before application solution needs to be diluted with 0,5-1 liters of water. At dilution to use the mixer to mixing in order to avoid formation of lumps. Then mix has to stay within 10 minutes then once again carefully to mix and begin application. Solution is evenly applied on a surface by means of a rubber trowel. Time of operation of the diluted solution makes 2-3 hours. On the expiration of this time do not try to use the diluted solution anew at all. If solution began to dry do not try to add also water for its further use.
The above-stated parameters are given for temperature 23 °С±2 heat and 50±5 humidity. Also above-stated parameters can change depending on a condition of the applied environment and climate. The recommended working temperature from +5 °C to +35 °C. To protect the put surface from sharp climatic change before works.
Area of an expense
0,3-1kg solution on 1-6m depending on the sizes of tiles.
Is issued in plastic bags weighing 1 kg. To store in original packing in the dry, intended for storage rooms within 12 months. After opening of a bag to use mix within 1 week. To store a maximum on 10 bags down.
Not to mix with other substances such as, plaster, lime, etc. A basis of solution is cement for what it is recommended to use protective masks and points during the work with solution.
Highly effective material for filling of seams on a cement basis. Possesses high stability against water and frost penetration. It is easily applied. Does not burst, does not lose color. Prevents formation of mosses and a bacterium.
Application
The surface needs to be cleared of dust, fat, paint, etc. of substances. If temperature of a surface is above 25 °C, it needs to be moistened with water for receiving more damp surface.
Before application solution needs to be diluted with 0,5-1 liters of water. At dilution to use the mixer to mixing in order to avoid formation of lumps. Then mix has to stay within 10 minutes then once again carefully to mix and begin application. Solution is evenly applied on a surface by means of a rubber trowel. Time of operation of the diluted solution makes 2-3 hours. On the expiration of this time do not try to use the diluted solution anew at all. If solution began to dry do not try to add also water for its further use.
The above-stated parameters are given for temperature 23 °С±2 heat and 50±5 humidity. Also above-stated parameters can change depending on a condition of the applied environment and climate. The recommended working temperature from +5 °C to +35 °C. To protect the put surface from sharp climatic change before works.
Area of an expense
0,3-1kg solution on 1-6m depending on the sizes of tiles.
Is issued in plastic bags weighing 1 kg. To store in original packing in the dry, intended for storage rooms within 12 months. After opening of a bag to use mix within 1 week. To store a maximum on 10 bags down.
Not to mix with other substances such as, plaster, lime, etc. A basis of solution is cement for what it is recommended to use protective masks and points during the work with solution.
Contact the seller
Filler of seams VENTUM FUGA®