Seller
Uzbekistan, Tashkent
(View map)
(View map)
+998
Display phones
8
8 years on Allbiz
Technical characteristics
- BrandCEBORA
- Country of manufactureItaly
Description
Type | Ardent cutting |
Power | from 160,00 kW |
Scope | Industrial |
Weight | 140,0 kg |
Width | 465 mm |
Depth | 720 mm |
Height | 965 mm |
Guarantee | 12 months |
The three-phase source of the chopperny choppeg type working with various tension of PLASMA PROF 163 ACC, an art. 957, thanks to high power (160A at 40%), and also to use of a new torch of CP161, provide outstanding productivity when cutting metal: the recommended thickness for the best quality of cutting and productivity is equal to 40 mm; the maximum thickness is 45 mm and extreme thickness is 50 mm. Maximum thickness of a punched hole of a continuous element of 20 mm. High rates of a continuous cycle (95A of al of 100%) and speeds of cutting made PLASMA PROF 163 ACC the ideal equipment for use on productions of the average size.
Main characteristics:
- Continuous monitoring of supply voltage, verification of malfunctions (for example, a mark of existence of a phase) and reduction of the power supply in a safe state.
- Adjustment and check of pressure of air with digital indication of optimum value on the display of the forward panel, depending on current and length of a torch.
- The Post-gas function which cools a torch after switching off of an arch that promotes undervoltage of components of a torch and allows to increase service life of expendables.
- Ignition of an arch with high frequency that guarantees reliable excitement of an arch on duty.
- The reduced wear of an electrode of a nozzle.
- The central fastening of a torch with the protection device for the prevention of casual contact with the parts which are energized.
- Explosion-proof execution of the block of a reducer of air.
- The mode for witness marks (Gouging) which can be chosen on the forward panel.
- The function of automatic restart of an arch (Self Restagt) on duty chosen directly from the control panel which automatically interrupts and restores an arch when cutting grids and lattices
- Display on the display of current of cutting and the corresponding diameter of a nozzle which will be used.
- The RS232 socket on the forward panel for updating or setting up the software.
- Length of a hose of 6 or 12 m is delivered complete with CP161 MAR torch, for manual or machine cutting.
- The art is prepared for work with a pantograph via the analog interface. 108 (option) and high-frequency remote block art. 481 (option) to receive the maximum total length of a hose of a torch, equal 22 m
- Automatic recognition of torches: CP161 MAR/DAR/DAR+HV14
- The Chopperny technology and working frequency are 17 kHz.
Conforms to the EN 61000 3 - 12 standard
Technical characteristics | |
220/230-400V 415/440V 50/60 Hz ± 10% | Three-phase food |
220-230V 50 A; 400-415/440V 30 A |
Safety lock with a srabatyvayeniye delay |
27 KVA 40% 22 KVA 60% 16 KVA 100% |
Power consumption |
20A ÷ 160A | Range of adjustment of current |
160A 40% 120A 60% 95A 100% |
Coefficient of a running cycle (10 min. 400C) according to the IEC 60974.1 standard |
ELECTRONIC | Stepless regulation |
40-45-(50) mm 1 "2/3-1" 3/4-(2") |
Steel thickness: recommended - maximum - limit |
220 lt/min - 5 bar | Air consumption |
IP 21 S | Protection class |
Similar company products
Contact the seller
PLASMA PROF 163