POWER PLASMA 3035/M
- Customer pickup,
- Courier
- In detail
(View map)
- BrandCEBORA
- Country of manufactureItaly
Type | Ardent cutting |
Scope | Professional |
Weight | 13,0 kg |
Width | 175 mm |
Depth | 503 mm |
Height | 400 mm |
Guarantee | 12 months |
POWER PLASMA 3035/M was created for satisfaction of requirement to work in body shops with the easy and simple power supply in use with the minimum system requirements, but is able to provide the highest quality of cutting of any metals, including high-strength steel.
POWER PLASMA 3035/M was created for satisfaction of requirement to work in body shops with the easy and simple power supply in use with the minimum system requirements, but in to sostoyaniiobespechit the highest quality of cutting of any metals, including high-strength steel.
POWER PLASMA 3035/M, weighs only 13 kg, including a torch and demands single-phase food; the consumption of air of only 60 l/min works at compressed air or nitrogen (for high-quality cutting) which move with pressure of 3.5 bars (therefore can eat from 25 l of the compressor).
It is especially recommended to use the device for cutting of the metal sheets imposed at each other which are often found during the work with automobile bodies.
- - Avtomatichesayasmena of tension (115B-230B +15%/-20%)
- - Work with an arch on duty that allows to work at metals with paint and varnish or other covering.
- - The function of automatic restart of an arch (Self Restart Pilot) on duty chosen directly from the control panel and which automatically interrupts also a vosstanavlivayetduga when cutting grids and lattices, increasing a proizvoditelnostyoperator
- - The protection device on the holder of a nozzle, according to the IEe 60974-7 standards to avoid risk of casual contact of the operator from a metallomsopl.
- - Ignition of an arch with high frequency that guarantees reliable a vozbuzhdeniyedezhurny arch and reduces hindrances.
- - High electromagnetic compatibility according to the EN60974-10 standard that allows to use the device in close proximity to the electronic equipment (such as computers, PLK, etc.).
- - Vzryvozashchishchennoyeispolneniyebloka of an air reducer.
Conforms to the EN 61000-3-12 standard that is a guarantee of essential economy of electricity consumption and a considerable tolerance of supply voltage (+15%/-20%).
The power supply can be used from a power line of the diesel generator of the corresponding power (min. 6 kVA).
Extract from the table of cutting | ||
Low-carbonaceous steel - Mild Steel | ||
Current (A) | Thickness (mm) | Speed of cutting (m/min) |
30 | 2 | 2.70 |
4 | 1.30 | |
8 | 0.50 |
Low-carbonaceous steel - Stainless Steel | ||
Current (A) | Thickness (mm) | Speed of cutting (m/min) |
30 | 2 | 2.30 |
4 | 1.20 | |
8 | 0.41 |
Aluminum - Aluminium | ||
Current (A) | Thickness (mm) | Speed of cutting (m/min) |
30 | 2 | 5.90 |
4 | 2.14 | |
8 | 0.90 |