Plastic tile from PVC
- Customer pickup,
- Courier
- In detail
- BrandAsiya Plast
- Country of manufactureUzbekistan
- Type of plastic moldingMould
Plastic tile from PVC (polyvinylchloride) with additives (additiva) for improvement of the characteristic of material for resistance to climatic changes, i.e., direct sunshine (ultraviolet) of heat, a frost, floods, corrosion, hit of acid-base substances and thermal processing do not influence its structure in any way.
ADVANTAGE IN OPERATION.
Correctly executed installation and the device of an obreshetka under a professional flooring – guarantee of reliability and durability of a roof. Though he differs in simplicity, but demands respect for all construction norms and technologies
The device of an obreshetka under a professional flooring demands use of the wooden bars or boards laid closely or with expanded spacing perpendicular to rafters. This design provides the necessary durability of a roof, its resilience and uniform distribution of external loadings.
It is mounted at construction of rafter systems from a tree or metal, and also on the roofs with a small bias executed from reinforced concrete plates. Installation of a wooden obreshetka under a tile is carried out by means of brackets, nails, self-tapping screws, the expansion bolt shield nails, depending on material of a rafter framework or the basis of a roof.
As well as the majority of roofing coverings, the pro-thinned-out leaf of PVC fastens to an obreshetka. The step of an obreshetka under a tile is stipulated, proceeding from a tilt angle of a slope of a roof:
- at the minimum bias of a roof the continuous obreshetka, or an obreshetka with the step which is not exceeding 400 mm is necessary for installation a tile (the choice depends on thickness of metal and brand of the used material);
- at an average bias the wooden basis can be mounted with a step of 300 - 650 mm;
- if the roof has a big corner of a bias, the step can make up to 1000 mm;
Size of a roofing professional flooring and its accessories:
Plastic tile |
3,07 x 1,05 |
The fad the main (on shtuchno) |
1,12 x 0,32 |
The fad side (on shtuchno) |
1,11 x 0,25 |
The trench (on shtuchno) |
1,06 x 0,56 |
Cross (on shtuchno) |
0,50 x 0,56 |
Corner (on shtuchno) |
0,28 x 0,29 |
Stopper fixing (on shtuchno) |
0,003 x 0,003 |
TECHNICAL PARAMETERS:
Weight 1 leaf – 9 kg
Maintains freight to 100 kg. on 1 sq.m.
Fasten on ordinary self-tapping screws or nails.
In comparison with a metal tile, it misses up to 30% of light.
It is cut easily by means of the hand saw for metal, electric fret saws (bee), by a tortsovochny saw or the Bulgarian, etc. To do an aperture, a facet it is possible by means of a drill, and also when fastening on self-tapping screws or nails it will not burst, will not give way and not to crumble.
Maxims. thermal stability temperature + 1200C
frost resistance to – 300C of degrees.
The goods are protected from influence UF.
Does not change color at direct solar influence long time.
Waterproof;
Frost-resistant
Heat-resistant
Does not burn.
It is not toxic.
Ecological pure
The GOST 30673-99 Thermal stability at +120 degrees within 30 min. (there are no swellings, cracks, stratifications)
EDS-T-7513 Frost resistance 7h at-30 degrees (Without appearance change)
The GOST 4650-80 Water absorption 8h, at +23 degrees (0,041%)
The GOST 11262-80 Durability at stretching (23,15 MPas)
GOST 4647-79 Impact strength across Sharpi, (16,93 kJ/sq.m)
GOST 11529-86 Change of the Linear Sizes (0,9%)
Guarantee of 25 years.