Steel radiators

Steel section radiators make of holodnokatany steel pipes. They are made on the special automated machines. The advantage of steel section radiators is not only the modern design, but also the fact that steel radiators on a thermolysis do not concede to pig-iron radiators. At steel radiators the raised thermolysis and the increased area of heat exchange is reached at the expense of sections. Steel radiators well work in systems of heating where acidity of the heat carrier does not exceed norm and measures are taken for prevention of sharp pressure differences and temperature. The advantage of steel radiators is that they quickly heat the heated room and quickly react to change of parameters of regulation. In junctions of sections there are no zauzheniye thanks to what an internal surface of devices absolutely smooth. For this reason formation of stagnant zones and a contamination of channels is absolutely excluded, and it is especially important at installation of radiators in city systems of heating. For these radiators there is no restriction on pressure in heating system of the building as pressure of destruction of section makes 215 atm. Unlike pig-iron devices steel have rather small weight, one section of such device weighs less than 3 kilograms, at the same time the section is capable to contain to seven hundred grams of liquid. One more advantage of steel radiators is that they can be calculated on very wide range of pressure. The heat transfer of any steel radiators is quite high thanks to good heat conductivity of the used alloys. The majority of models are calculated on working pressure to 6 atmospheres. If to speak about appearance, then steel radiators represent the devices having modern, classical design. At the same time, they are not deprived of appeal and esthetics that allows them with ease and without problems to fit into registration of the interiors issued practically in any style.

The steel, convective and radiation, section heating radiator of production of JV GSKB is characterized by modern design at the expense of elegant collectors with soft lines of sections. The small lag effect and big capacity of water of a steel radiator define its high efficiency during creation of comfortable conditions and ensuring energy saving in systems of heating. There is also one more big plus - steel radiators have no acute angles, therefore, they are safety.

The steel radiator looks esthetically, has small weight, is convenient for installation and fits into any interior. Radiators represent integral assembly from 7 sections. At the expense of the large internal volume of sections and the raised thermolysis - the steel radiator energoeffektiven is also economic. The section of the offered steel radiator has depth only 66 mm, water capacity makes about 0,700 liters depending on modification, the area of heating of 0,15 - 0,2 sq.m. Simplicity of a design of radiators provides them rather long resource of work. At the same time qualitative steel heating radiators are made from rather thick (1,7-2,1 mm) became that also positively affects their durability. Each let-out steel radiator passes pressure testing - test pressure of 8 MPas.

The listed advantages of steel radiators taking into account their low cost in comparison with pig-iron and aluminum radiators, at an equal thermolysis create an excellent opportunity for customers and designers optimum to solve problems of heating of modern buildings at the minimum financial expenses.