TE 09 turnstile

Turnstile production intek

Turnstiles tripods are electromechanical

Operation manual and technical specification

Dear buyer!
We ask you to study the present manual attentively.
It will allow you to use operational qualities of a turnstile optimum.
Attention!
Your turnstile has the following modification of execution:
The produced models a model mark
"TE-05 fungus"
"TE-07 portal"
"TE-08 tripod"


1. APPOINTMENT

Electromechanical turnstiles tripods are intended for management of flows of people in rooms and checkpoints.
Models of turnstiles are produced:
- floor execution - TE-05 Fungus, the TE-07 Portal and the TE-08 Tripod.
Turnstiles are controlled from the remote control (RC) and provide the admission in any of two directions as on one person, and groups of people.
Capacity is equal in the mode of single pass of all turnstiles
20-30 people a minute, and in the mode of continuous pass it is equal 40-60 people a minute.
Under the terms of application electromechanical turnstiles correspond to the UHL 4.2 group in accordance with GOST 151 - to show phone-. Turnstiles are intended for operation indoors at a temperature from +1 °C to +50 °C.
It is forbidden to use a turnstile tripod without bar anti-panic indoors where there is no emergency exit or if near a turnstile there is no fast-opened protection.

2. SPECIFICATIONS
Supply voltage, In 125 of %
Current sort constant
Power consumption, no more, than A W:
8
Mass of a turnstile, no more, than a kg:
- TE-05
- TE-07
- TE-08

Overall dimensions (length * width * height), mm:
- TE-05
- TE-07
- TE-08

785 x 825 x 1030
948 x 649 x 1000
793 x 760 x 985

Width of blocking of pass, mm:
- TE-05
- TE-07
- TE-08
560
500
560
Length of levers, mm:
- TE-05,TE-08
- TE-07
615
503
The maximum length of a cable from a turnstile to PDU, m 50
The maximum length of a cable from a turnstile to the power supply, m
20

3. DELIVERY SET

Turnstile of 1 piece.
Levers of a protection of 3 pieces.
Passport. Operation manual on 1 piece.
By the manufacturer by the separate order the power supply unit with parameters, necessary for operation of a turnstile, can be delivered:
- output voltage is 12 V of a direct current;
- output current not less 1.5A

4. DEVICE AND PRINCIPLE OF WORK.

The turnstile consists of the rotary mechanism 1 closed by a casing 2, the case 3 and levers of a protection 4. PDU is connected to turnstiles of all models. Basic electric circuits for all models of turnstiles and PDU are given in Appendices.
Turnstiles remotely open for pass of both one person, and group of people in the set direction during any period. For convenience of management from PDU, and also for the purpose of ensuring interface of turnstiles to control and management systems for access (SKUD), function of a delay of time for pass through a turnstile with compulsory early dumping upon pass is provided in the block of electronic control (BEC).
The rotary mechanism has an inclined axis of rotation of three bars moving within pass width. The movement of the rotary mechanism is blocked by the electromagnetic drive. At issuing the command on permission of pass (the security guard with PDU or automatically from SKUD in case the Consumer established it) the mechanism of turn will be unblocked for pass of one person or group of people (depending on the chosen mode).
In turnstiles of all modifications openings for input of a cable are provided in the basis – in case wires from a turnstile pass under a floor.
In emergency situations: in cases of the fire, an alarm signal, a bringing of large-size freights, etc., ensuring easy access in turnstiles is carried out the next ways:
a) turn of the clowns of the 6th mechanism of a rasfiksation (see Fig.) established in the lower part of the rotary mechanism and providing its compulsory rasfiksirovaniye;
b) removal of levers 4;
c) opening of the lever of "anti-panic" (see item 6.4.)