AVANCE 32 controller

AVANCE 32 controller

The new controller (the gas computer) is executed by AVANCE 32 on the modernized hardware platform and at present its work takes place under control of an operating system in real time. All data are processed at once after receipt in the controller without delays on buffering. Time of information processing is measured by the tenth fractions of a second less. Despite the decreased size (the case 83 x 88 [mm] with one 32-contact automobile molex socket), the amount of functionality of the device increased.

• Installation on cars with engines to 4 cylinders.
• Introduction of corrections of time of injection of gas in the parameters which are read out from the OBD car (The K-line and the supported CAN protocols).
• Connection of one sensor of oxygen on tension and shutdown of the fuel pump of the car at the same time.
• Measurement of power and torque of the engine directly at the movement on the road (without use of the dynamometer stand).
• Function of additional injection of gasoline during the work on gas.
• Completely automatic process of calibration by one pressing of the button of the switch.
• The simplified algorithm of step-by-step control of system by means of the master of control.
• Very simple installation and setup of the device thanks to the uniform simple software in use with modern autocalibration and autodetection of a signal of turns, and also a possibility of reading of turns of the engine from petrol injectors.
• Scanning and preview of a form of a signal of petrol injectors.
• The updated algorithm of autoadaptation during the movement of the car.
• The switch with the 4-contact socket integrated by a sound signal and self-regulating level of illumination.
• Automatic removal of codes of malfunctions from memory of EBU of the car at start of the engine.