POWER PLASMA 2025/M
- Customer pickup,
- Courier
- In detail
(View map)
- BrandCEBORA
- Country of manufactureItaly
Type | Ardent cutting |
Welding current | 5 - 30 A |
Min. tension in a network | 230 V |
Scope | Professional |
Weight | 9,4 kg |
Width | 171 mm |
Depth | 390 mm |
Height | 340 mm |
Guarantee | 12 months |
POWER PLASMA 2025/M was created for satisfaction of requirement to work with the easy and simple power supply in use with the minimum system requirements (2,3 kVA at the maximum power) which is able to provide the highest quality of cutting of any metals.
POWER PLASMA 2025/M was created for satisfaction of requirement to work with the easy and simple power supply in use with the minimum system requirements (2,3 kVA at the maximum power) which is able to provide the highest quality of cutting of any metals.
POWER PLASMA 20255/M weighs only 9,4 kg, including a torch and demands single-phase food; works at the compressed air given with pressure of 3.5 bars, a consumption of air of only 55 l/min (therefore, can eat from 25 l of the compressor).
- Works with an arch on duty like "on air" that allows to work at metals with paint and varnish or other covering.
- Length of a hose of 4 m with system of ignition "on air" without high frequencies is completed with a torch of Seboga of CP41C. High electromagnetic compatibility according to the EN60974-10 standard that allows to use the device in close proximity to the electronic equipment (such as computers, PLK, etc.).
- Explosion-proof execution of the block of a reducer of air.
Conforms to the EN 61000-3-12 standard that is a guarantee of essential economy of electricity consumption and a considerable tolerance of supply voltage (+15%/-20%).
The power supply can be used from a power line of the diesel generator of the corresponding power (min. 4 kVA).
Extract from the table of cutting | ||
Low-carbonaceous steel - Mild Steel | ||
Current (A) | Thickness (mm) | Speed of cutting (m/min) |
20 | 1 | 4.00 |
3 | 1.10 | |
6 | 0.40 |
Low-carbonaceous steel - Stainless Steel | ||
Current (A) | Thickness (mm) | Speed of cutting (m/min) |
20 | 1 | 3.00 |
3 | 0.70 | |
6 | 0.30 |
Aluminum - Aluminium | ||
Current (A) | Thickness (mm) | Speed of cutting (m/min) |
20 | 1 | 4.60 |
3 | 1.50 | |
6 | 0.55 |